When a new Honda accord is bought
singlesndbarrel | 14 Maj, 2019 04:34When a new Honda accord is bought, there will be a pre installed stereo system
present in the vehicle's dashboard. In many cases it would be very essential to
remove the stereo from its place. For example if one needs to add any new
components then the first thing to be done is to remove the stereo unit so as so
access the rear speaker wires. There is Bimetallic
Barrel no need for a professional to remove a stereo if one has a bit of
experience and a few tips then anyone can do it. But how to remove a stereo in a
Honda accord?
There are a few tools required to do this job. The usage
of these tools makes it easy and comfortable while doing the job. The tools
includes a trim panel removing tool, a flat head screw driver, and a Philips
head screw driver. These are used to loosen the screw and to lift the trim.
The first and foremost thing to do before touching anything is to remove
the battery. That is remove the negative terminal of the battery. The cable
cramp is loosening with the help if a Philips screw driver. Now the next thing
to do is to remove the clock from the car. For this purpose a flat head screw
driver can be used. This is because only this screw driver can fit in the small
spacing in between the edge of the clock and the panel.
Once the clock
is loosen then use your hand to pull it out and remove the wires coming fro the
power supply and place it aside until the job is completed. Using a Philips
screw driver, the screws present in the back side of the dash opening are
removed slowly. In the same way, the two screws present in the bottom of the
trim panel are removing with the help of a Philips screw driver.
In the
next step after loosening the screws connecting the dash trim panel, the dash
trim panel is aside from its original place. While pulling out make sure that
first the bottom edges are pulled out and then the rest. While doing this it
would be comfortable if you use the hands around the borders of the trim panel.
Now one has to disconnect the connections between the car and the knobs
controlling the climate. This is the last component that holds the trim panel to
the dash board once this is done then the trim panel can be easily removed. Like
the clock, the panel is also kept aside until the job is finished.
In
this step the screws surrounding the stereo should be removed with help of a
Philips screw driver. Once it is done, the stereo is pulled out slowly from the
dash until the wires in the back side are accessible. Now one can remove the
wires coming from the antenna, power supply and the wires going to the speakers.
So the stereo unit can be removed.
So it is very essential for one to
know how to remove a stereo in a Honda accord.
Posted in
screw and barrel for extruder .
Dodaj komentar: (0).
Trekbekovi:(0).
Permalink
«Next post |
Previous post»